Woodworking 101: Everything You Need To Know
It is so exciting to start your journey into mastering woodworking. Regardless of your project focus, woodworking is a craft that is highly revered. It’s not a simple skill, but you can do it with the right knowledge. With practice, your end products may just amaze you.
Safety must be a priority when doing any time of woodworking project. Be sure that you use the tools correctly and observe all safeguards. Don’t take guards off the tools you save. If you did something stupid, you don’t want to go to the project.
Try using stair gauges for your crosscut guide. Then you should mark all of the notches are. You will make a crosscut guide when you put each of them on the carpenter’s square together.
There are often specialists available to get you comfortable using the tool quickly. You should also ask if they have some kind of a handout that will familiarize you can do with the tool.
Be sure you are realistic about what is possible under your money. It is very disappointing to run out that the money isn’t there after you have already completed half of the project. Do your due diligence to avoid surprises.
Are you working with a screw in a space that out of the way and your hand to fit simultaneously or comfortably? Your toolbox may hold the answer. Get a screwdriver with a long handle and a 12-point socket.
Wear sturdy footwear when you are working on your wood projects. You want to ensure that your feet are protected in case you step on something. You need to have sturdy shoes for the environment you are working in.
Don’t always rely on your tape measure. Cutting on scrap wood first will be a great idea and means you can test a fitting out first. Planning your cuts in several ways keeps your mind working.
Stay in contact with family and friends. Your woodworking shop likely is your private space and lacks Internet access. There will be moments when you have a particular problem within a larger project. You will probably never have a problem that someone else hasn’t already had.
Try to find the wood you can use. There are many places that use wood and discard scraps which can be useful. Flooring construction and store companies toss old wood. If they have something you can use for pieces you can use, use this to your advantage and see. You can also save money this way.
Stair gauges are great guides for circular saw guides. Normally you use a stair gauge is used to match the rise and the run of a stair jack so you can match up the notches. But, when they’re used on a carpenter square tongue, a circular saw guide is created.
Avoid getting your extension cords all tangled up while woodworking by using just one extension cord. Unplug one tool and plug-in another when you need a new opening. This safe tip can prevent tripping hazards and also from getting electrocuted.
Check your wood stain out that you’re using on an inconspicuous spot. The stain might not be what you were thinking of and not come out the blotchy or off-color. Checking it on a hidden spot will help you make any changes you need. This technique will reduce your work in the long run.
Before you sand, wet any surface you are planning on sanding. Wetting helps raise the surface raises the grain. This will then allow you to avoid fine scratches. This will provide your final project with a professional look. It could also make you sure you’re not doing extra work later on.
There are a number of power tools you should have in your woodworking arsenal. If you do not have them, get a jigsaw, a small table saw, power sander, drills, then you need to get these things. A power sander of any type will benefit you more than none, even though orbital sanders are great.
Plan a budget for your woodworking budget. Find out how much your materials will cost you. Know what you’re going to need and the cost. You would hate to quit a project part way through simply because you don’t have the money.
Watching woodworkers may be the easiest way for you can learn woodworking. There are a lot of tutorial videos online to help you to learn what certain tools are used. You can view the whole project from start to finish in videos that show all aspects of a project.
Think about the future when you plan out a big project. If a shed building project is being considered, will you want it to have power at some point, for example? If that’s the case, make sure that you have enough room for switches and wires, in addition to space for your light fixture in the ceiling.
Before cutting. Even new lumber this is important to make sure you don’t have an accident, inspect each piece of wood for any debris or nails and screws. Lumber is generally held and stacked together with bands that can cause injury.
Use a high-quality clamp when gluing pieces together. This will keep them in place as the glue is drying. It’s very possible that you will need a number of different types of clamps to complete your project.
Write down your pending shop list item by item as you find yourself needing or running low on. This technique will make shopping trips a lot simpler and you never run out of an item.
A Shop-Vac is a great investment to clean your area after you woodshop at the end of the day. This will suck up all the loose dust and wood waste. Use a dust brush to get the debris off of your power tools. Use your shop vac to pick up all the excess sawdust.
Use a high-quality clamp when gluing pieces together. This will make sure things stay in place as the glue is drying. You might have to get a time.
The local PBS station often airs programming that has tutorials on doing woodworking. They have a variety of different approaches to woodworking.
Dovetail joints are quite beautiful but are not worth the work if they will be hidden. So think about this before doing something more complex, sometimes using a biscuit or some glue will look a little better.
If you don’t have one available, a large clamp is a must for a large project. Buy yourself a pipe clamp.
As discussed, woodworking requires some work and effort. You have to be willing to learn as much as you can about the skills, best and techniques practices. Use the information from this article to become a master woodworker.
I tear apart an old Nintendo NES and remake the case out of fancy wood. Brought to you by Skillshare. Get a two-month free trial and start learning! https://skl.sh/makesomething9
★ MUSIC ★
★ TOOLS & SUPPLIES (Affiliate Links)★
72 Pin Cartridge Slot: https://amzn.to/2NQjd9s
NES Clone: https://amzn.to/2xIpCZH
Miter Saw: https://amzn.to/30wyZbi
Little Bandsaw: https://amzn.to/2LmBGb3
Table Saw: http://amzn.to/2k8ODcP
Yellow Push Block: https://amzn.to/2WCsGR3
Red Clamps: https://amzn.to/2XMB9Si
Disc Sander: https://amzn.to/2XaGbfX
Laser Cutter: https://glowforge.us/fycBT8
Painters Tape: https://amzn.to/2Y2tnI0
Large Bandsaw: https://amzn.to/2xMotQB
Wood Screw Clamp: https://amzn.to/30tD3cb
Drill Press (similar): http://shrsl.com/1lwfn
Oil Finish: http://bit.ly/2VNNYfs
★ WATCH MORE ★
Drill Press Station: https://youtu.be/YHY1FbyxdlY
Playlist of Woodworking Shop Projects and Jigs: http://bit.ly/2M3GYdk
★ ALL THE LINKS ★
Patreon Support / Extra Content: http://patreon.com/picciuto
T-Shirts / Books / Stickers / Plans: https://makesomething.com
My Other YouTube Channel: https://www.youtube.com/c/makesomething2
Making It Podcast: http://makingitpodcast.com
★ FOLLOW ME ★
Tweets by drunkenwood